STABILITY STUDY OF OPEN MINE SLOPES AT PIT 22 GN PT KITADIN SITE EMBALUT, KUTAI KARTANEGARA REGENCY, EAST KALIMANTAN PROVINCE

Tandidatu T. Deny, Sundek Hariyadi

DOI: https://doi.org/10.30556/imj.Vol24.No1.2021.1044

Abstract


The stability of slope, both on the slope of work and the final slope, is a very important aspect of slope stability, both on the slope of work and the final slope in open pit mining activities. The inconsistency of the slopes will result in the collapse of rocks around the excavation site. This happens because the condition of the rock when it has not been excavated is generally balanced. However, due to the discontinuous patterns that occur other than naturally and also due to the mining activities such as excavation, blasting and others, cause a reduction in the retaining force of the rock on the slope results in the equilibrium of the force tends to shift and is not balanced. Study of the stability of the open pit highwall slope at PIT 22 GN PT Kitadin Site Embalut, Kutai Kartanegara Regency, East Kalimantan Province was carried out with the aim to know the rock characteristics, to calculate slope geometry stable safety factors, and to recognize the type of landslide using a bishop method. The results of the modeling consist of several heights and slopes, as well as angles that is formed. Section AA’ has a safety factor value of 1.387, section BB has a safety factor of 1.482, section BB' has a safety factor value of 1.390, section DD' has a safety factor value of 1.318, section EE has a safety factor value of 2,381, section FF' has a safety factor value of 2.426, section GG' has a safety factor value of 2.424, section HH 'has a safety factor value of 2.339.

Keywords


highwall slope stability, open mine, pit 22 GN, coal

Full Text:

PDF

References


Azizi, M. A. and Handayani, H. E. (2011) ‘Karakterisasi parameter masukan untuk analisis kestabilan lereng tunggal (Studi kasus di PT.Tambang Batubara Bukit AsamTbk’, in Prosiding Seminar Nasional AVoER ke-3. Palembang: Universitas Sriwijaya, pp. 328–341.

Bishop, A. W. (1955) ‘The use of the slip circle in the stability analysis of slopes’, Géotechnique, 5(1), pp. 7–17. doi: 10.1680/geot.1955.5.1.7.

Budiman, M. (2011) Geologi dan studi kestabilan lereng daerah Dlinog dan sekitarnya Kecamatan Dlingo Kabupaten Bantul Daerah Insitmewa Yogyakarta. Universitas Pembangunan Nasional ‘Veteran’ Yogyakarta.

Das, B. M., Endah, N. and Mochtar, I. B. (1993) Mekanika tanah (Prinsip-prinsip rekayasa geoteknis). 2nd edn. Jakarta: Erlangga.

Hardiyatmo, H. C. (2017) Analisis dan perancangan fondasi I. 3rd edn. Yogyakarta: Gadjah Mada University Press.

Hariyadi, S. (2014) Analisis stabilitas lereng timbunan pada PT Kayan Putra Utama Coal, Kabupaten Kutai Kartanegara, Provinsi Kalimantan Timur. Universitas Pembangunan Nasioanl ‘Veteran’ Yogyakarta.

Hoek, E. and Brown, E. T. (1980) ‘Empirical strength criterion for rock masses’, in Journal of the Power Division: Proceedings of American Society of Civil Engineers Vol. 106. American Society of Civil Engineering, pp. 1013–1035.

Karyono (2004) ‘Kemantapan lereng batuan: Langkah perhitungan faktor keamanan untuk longsoran busur dengan menggunakan diagram Hoek’. Bandung: Universitas Islam Bandung, p. 19. Available at: https://www.academia.edu/4384577/Kemantapan_Lereng_Batuan_Ir._Karyono_M.T._KEMANTAPAN_LERENG_BATUANLangkah_Perhitungan_Faktor_Keamanan_Untuk_Longsoran_Busur_Dengan_Menggunakan_Diagram_Hoek.

Menteri Energi dan Sumber Daya Mineral (2018) Keputusan Menteri Energi dan Sumber daya Mineral No. 1827 K/30/MEM/2018 Tentang pedoman pelaksanaan kaidah teknik pertambangan yang baik. Indonesia.

Zakaria, Z. (2010) ‘Model starlet, suatu usulan untuk mitigasi bencana longsor dengan pendekatan genetika wilayah (Studi kasus: Longsoran Citatah, Padalarang, Jawa)’, Indonesian Journal on Geoscience, 5(2), pp. 93–112. doi: 10.17014/ijog.v5i2.95.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Indonesian Mining Journal

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.