RISK ASSESSMENT OF OPEN PIT SLOPE DESIGN AT PT ADARO INDONESIA
DOI:
https://doi.org/10.30556/imj.Vol17.No3.2014.317Keywords:
risk, open pit, failure probability, slope stabilityAbstract
Risk assessment of open pit slope stability is an important aspect to be considered in a decision making of slope design. The risk of slope failure that occurred on the slopes of the mine affect two factors namely the failure probability (FP), and consequences (C) of slope failure. FP is obtained from the collection of the value of Safety Factor (SF) < 1 compared to the total value of SF, while the consequences is estimated from the sectional area multiplied by the width of slope failure. Physical and mechanical properties of sandstone was collected from PT Adaro Indonesia, and tested by “Kolmogorov-Smirnov (K-S)” fitting method to obtain an assumed theoretical distribution that be sued with the character of the original distribution data. “Monte Carlo (MC)” and “Latin Hy- percube (LH)” sampling method is used as a tool to generate sample data, and both methods were compared. Finally Validation is conducted in order to propose an acceptable criteria of FP for single slope of sandstone.
References
Abramson, L.W., Lee, T.S., Sharma, S., and Boyce, G.M., 2000. Slope Stability and Stabilization Meth- ods, John Wiley & Sons Inc., p.420-455.
Baecher, G.B., and Christian, J.T., 2003. Reliability and statistics in geotechnical engineering. Wiley, Chichester, U.K., pp. 399-430.
Hoek E., 2007, Practical Rock Engineering, Evert Hoek Consulting Engineer Inc., p.128-140.
M.A. Azizi, S.Kramadibrata, R.K.Wattimena, I.D. Sidi, 2013, Characterization of Physical & Mechanical Properties Distribution of Indonesian Coal; ISRM International Symposium, EUROCK 2013, 21-26 September 2013, Wroclaw, Poland.
Read J., Stacey P., 2009. Guidelines For Open Pit Slope Design, CSIRO Publishing, p.221-235.
R.K. Wattimena, S. Kramadibrata, I.D. Sidi, and M.A. Azizi, 2012. Probabilistic Analysis of Single Bench Using New Slope Stability Curves, Prosiding 7th Asian Rock Mechanics Symposium (ARMS7), South Korean.
Saptono, S., 2012. Pengembangan Metode Analisis Stabilitas Lereng Berdasarkan Karakterisasi Batuan Di Tambang Terbuka Batubara, Penelitian Disertasi ITB, p.197-205.
Steffen, O.K.H., Contreras L.F., Terbrugge P.J., and Venter J., 2008. A risk evaluation approach for pit slope design, The 42nd US Rock Mechanics Symposium and 2nd U.S.-Canada Rock Mechan- ics Symposium, held in San Francisco, June 29-July 2.
S. Kramadibrata, R.K. Wattimena, I.D. Sidi, M.A. Azizi, and Y. Adriansyah, 2012. Open Pit Mine Slope Stability and Uncertainty; Prosiding 7th Asian Rock Mechanics Symposium (ARMS7), South Korean.
S. A. Pramuditya, M. A. Azizi, S. Kramadibrata, R.K.Wattimena, and I.D. Sidi, 2013, Application of Fitting & Probabilistic Method to Characterize Physical & Mechanical Rock Properties Distribu- tion; Proceeding South East Asian Conference on Mathematics and Its Application, SEACMA 2013, Organized by Institut Teknologi Sepuluh Nopember Surabaya.
Terbrugge, P.J., Wesseloo, J., Venter, J., and Steffen, O.K.H., 2006. A risk consequence approach to open pit slope design, The Journal of The South African Institute of Mining and Metallurgy, Vol.106, p.503-514.
Tse, Y.K., 2009. Nonlife Actuarial Models, Theory, Methods and Evaluation, Cambridge University Press, pp.380-394.
Downloads
Issue
Section
License
Indonesian Mining Journal provides immediate open access to its content on the principle that making research freely available to the public to supports a greater global exchange of knowledge.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
