SUBSIDENCE AND HEAT PROPAGATION MODELING ON THE UNDERGROUND COAL GASIFICATION (CASE STUDY AT MUARA ENIM FORMATION, SOUTH SUMATERA)

Authors

  • Zulfahmi Zulfahmi R & D Centre for Mineral and Coal Technology
  • Ildrem Syafri Faculty of Geology Engineering-Padjadjaran University
  • Abdurrokhim Abdurrokhim Faculty of Geology Engineering-Padjadjaran University
  • Ridho Kresna Wattimena Faculty of Mining and Petroleum Engineering-ITB

DOI:

https://doi.org/10.30556/imj.Vol23.No2.2020.1132

Keywords:

numerical modeling, subsidence, cap rock, kaolinite, non-kaolinite

Abstract

One of the important issues to study underground coal gasification (UCG) is the prediction of surface subsidence. Several parameters that influence these conditions are the thickness of cap rock, the physical and mechanical characteristics, the structure condition, the minerals composition of the rock, and external conditions. This study had been carried out simulation and modeling to determine the level of surface subsidence risk and the effect of high temperatures due to the activities. The modeling results show that the thickness of the rock above the UCG coal seam greatly affects the surface subsidence. The depth is more than 200 m and found that the SF value is 1.59 which indicates UCG reactor depth of ≥ 200 m is safe from the risk of subsidence. From the characteristic aspect of the cap rock, the claystone types which not contain kaolinite minerals are more prone to collapse than those of contain kaolinite minerals. From this models, the gasifier at 150 m depth was estimated that there will be a decline of -7.23 m, and the minimum subsidence is at 275 m about 0.1 m. The heat propagation modeling results show that at 50 m the temperature is estimated to be 213- 289°C, but if the thickness of the cap rock is > 200 m depth, the temperature is around 29-28°C.

References

Advani, S. H., Lee, J. K., Min, O. K., Aboustite, B. L., Chen, S. M. and Lee, S. C. (1983) “Stress mediated responses associated with UCG cavity and subsidance prediction modeling,” in Wieber, P. R., Martin, J. W., and Byrer, C. W. (eds.) Proceedings of the Ninth Annual Underground Coal Gasification Symposium. Bloomingdale, Illinois: L B Schaeffer EC&G, Washington Analytical Services Center Inc., Morgantown Operations, pp. 282–292.

Asadi, A., Shahriar, K., Goshtasbi, K. and Najm, K. (2005) “Development of a new mathematical model for prediction of surface subsidence due to inclined coal-seam mining,” Journal of The South African Institute of Mining and Metallurgy, 105(1), pp. 15–20.

Boldyrev, G. G. and Muyzemnek, A. J. (2008) “The modeling of deformation process in soils with use of ansys and Ls-Dyna programs,” in 6th International Conference on Case Histories in Geotechnical Engineering. Missouri University of Science and Technology, pp. 1.08 (1-10).

Christensen, R. M. (2019) Failure theory for materials science and engineering: Chapter VII-The ductile/brittle transition, gaging ductility levels, www.failurecriteria.com. Available at: https://www.failurecriteria.com/Media/Ductile_Brittle_Transition_Gaging_Ductility_Levels.pdf (Accessed: August 25, 2020).

Dong, S., Yin, H., Yao, S. and Zhang, F. (2013) “Detecting surface subsidence in coal mining area based on DInSAR technique,” Journal of Earth Science, 24(3), pp. 449–456. doi: 10.1007/s12583-013-0342-1.

Drucker, D. C. and Prager, W. (1952) “Soil mechanics and plastic analysis or limit design,” Quarterly of Applied Mathematics, 10(2), pp. 157–165.

Dyne, L. A. (1998) The prediction and occurance of chimney subsidance in Southwestern Pennsylvania. Virginia Polytechnic Institute and State University. Available at: https://vtechworks.lib.vt.edu/handle/10919/31383.

Ellison, R. D. and Schubert, C. E. (1981) “Subsidence effects guidelines for underground coal gasification,” in 7th underground coal conversion symposium. Fallen Leaf Lake, California: OSTI.GOV, pp. 799–822.

Eppelbaum, L., Kutasov, I. and Pilchin, A. (2014) Applied geothermics. Berlin, Heidelberg: Springer Berlin Heidelberg (Lecture Notes in Earth System Sciences). doi: 10.1007/978-3-642-34023-9.

Gregg, D. W. (1977) Ground subsidence resulting from underground coal gasification. Livermore, CA.

Huayang, D., Jinzhuang, W., Meifeng, C., Lixin, W. and Zengzhang, G. (2002) “Seam dip angle based mining subsidence model and its application,” International Journal of Rock Mechanics and Mining Sciences, 39(1), pp. 115–123. doi: 10.1016/S1365-1609(02)00008-4.

Irsyam, M., Sengara, W., Aldiamar, F., Widiyantoro, S., Triyos, W., Hilman, D., Kertapati, E., Meilano, I., Suhardjono, Asrurifak, M. and Ridwan, M. (2010) Ringkasan hasil studi tim revisi peta gempa Indonesia 2010. Bandung: Tim Revisi Peta Gempa Indonesia.

Langland, R. T. and Trent, B. C. (1981) “Computer models to support investigations of surface subsidence and associated ground motion induced by underground coal gasification.” Livermore: Lawrence Livermore National Lab., CA (USA); Science Applications, Inc., Steamboat Springs, CO (USA), UCRL-86437; CONF-810923-1.

Lee, J. K., Avasthi, J. M., Advani, S. . H. and Kitamura, M. (1985) “Parameter sensitivity studies for UCG related subsidence modeling,” in The 11th underground coal gasification symposium. Denver, Colorado: OSTI.GOV, pp. 424–433.

Lee, J. K., Advani, S. H., Chen, K. S. and Avasthi, J. M. (1986) “Application of rock mechanics and the finite element method to underground coal gasification process,” in The 27th U.S. Symposium on Rock Mechanics (USRMS). Tuscaloosa, Alabama: American Rock Mechanics Association.

Li, S. and Liu, W. K. (2000) “Numerical simulations of strain localization in inelastic solids using mesh-free methods,” International Journal for Numerical Methods in Engineering, 48(9), pp. 1285–1309. doi: 10.1002/1097-0207(20000730)48:9<1285::AID-NME825>3.0.CO;2-H.

Min, O. K. (1983) Finite element modeling of thermo-mechanical responses associated with underground coal conversion. Ohio State University.

Neto, E. A. de S., Peric, D. and Owen, D. R. J. (2008) Computational methods for plasticity: Theory and applications. Wiley.

Otto, C. and Kempka, T. (2015) “Thermo-mechanical simulations of rock behavior in underground coal gasification show negligible impact of temperature-dependent parameters on permeability changes,” Energies, 8(6), pp. 5800–5827. doi: 10.3390/en8065800.

Pilkey, W. D. (1994) Peterson’s stress concentration factors. John Wiley & Sons, Inc.

Purnama, A. and Huda, M. (2019) “A preliminary study of Indonesian coal basins for underground coal gasification development,” Indonesian Mining Journal, 22(1), pp. 61–76. doi: 10.30556/imj.Vol22.No1.2019.275.

Seccombe, K. R. (2014) Numerical modelling of mining subsidence. University of Southern Queensland. Available at: https://eprints.usq.edu.au/27315/1/Seccombe_2014.pdf.

Sica, L. U. R. (2017) An experimental study of the validity of the von Mises yielding criterion for elasto-viscoplastic materials. Pontificia Universidade Católica. Available at: https://www.researchgate.net/profile/Luiz_Umberto_Rodrigues_Sica2/publication/329150784_An_experimental_study_of_the_validity_of_the_von_Mises_yielding_criterion_for_elasto-viscoplastic_materials/links/5bf7f338a6fdcc53881530a3/An-experimental-study-of-the.

Sirdesai, N. N., Singh, R., Singh, T. N. and Ranjith, P. G. (2015) “Numerical and experimental study of strata behavior and land subsidence in an underground coal gasification project,” Proceedings of the International Association of Hydrological Sciences, 372, pp. 455–462. doi: 10.5194/piahs-372-455-2015.

Siriwardane, H. J., Layne, A. W. and Martin, J. W. (1989) “Thermo-mechanical modeling of ground movements associated with large underground coal gasification cavities in thin coal seams,” in Delft University of Technology International Underground Coal Gasification Symposium. Delft, Netherlands: Delft University of Technology, pp. 296–307.

Sroka, A., Tajdus, K. and Preusse, A. (2011) “Calculation of subsidence for room and pillar and longwall panels,” in Aziz, N. and Kininmonth, B. (eds.) Proceedings of the 2011 Coal Operators’ Conference. University of Wollongong: University of Wollongong Australia, pp. 83–90.

Sury, M., White, M., Kirton, J., Carr, P. and Woodbridge, R. (2004) Review of environmental issues of underground coal gasification. Birmingham.

Szabó, L. and Kossa, A. (2012) “A new exact integration method for the Drucker–Prager elastoplastic model with linear isotropic hardening,” International Journal of Solids and Structures, 49(1), pp. 170–190. doi: 10.1016/j.ijsolstr.2011.09.021.

Tian, H., Kempka, T., Feinendegen, M., Schlüter, R. and Ziegler, M. (2009) “Influence of high temperature on rock mass surrounding in situ coal conversion sites,” in 10th International Symposium on Environmental Geotechnology and Sustainable. Bochum, Germany, pp. 128–132.

Tian, H., Kempka, T., Xu, N.-X. and Ziegler, M. (2012) “Physical properties of sandstones after high temperature treatment,” Rock Mechanics and Rock Engineering, 45(6), pp. 1113–1117. doi: 10.1007/s00603-012-0228-z.

Tian, H. (2013) Development of a thermo-mechanical model for rocks exposed to high temperatures during underground coal gasification. Rheinisch-Westfälischen Technischen Hochschule Aachen. Available at:

https://d-nb.info/1035674211/34.

Tian, H., Kempka, T., Yu, S. and Ziegler, M. (2016) “Mechanical properties of sandstones exposed to high temperature,” Rock Mechanics and Rock Engineering, 49(1), pp. 321–327. doi: 10.1007/s00603-015-0724-z.

Tian, H., Ziegler, M. and Kempka, T. (2011) “Mechanical behavior of claystone exposed to high temperatures and its possibleimpacts on the stability of a deep nuclear waste repository,” in Cai, M. (ed.) Rock Mechanics: Achievements and Ambitions. London, UK: CRC Press, pp. 193–197. doi: 10.1201/b11438-39.

Tian, H., Ziegler, M. and Kempka, T. (2014) “Physical and mechanical behavior of claystone exposed to temperatures up to 1000 °C,” International Journal of Rock Mechanics and Mining Sciences, 70, pp. 144–153. doi: 10.1016/j.ijrmms.2014.04.014.

Turteltaub, S. (2002) “Inelastic analysis of structures, Milan Jirásek and Zdeněk P. Bažant, John Wiley & Sons, 2002, ISBN 0-471-98716-6, 758 Pages,” Structural and Multidisciplinary Optimization, 24(1), pp. 87–88. doi: 10.1007/s00158-002-0217-z.

Waddington, A. A. and Kay, D. R. (1995) “The incremental profile method for prediction of subsidence, tilt, curvature and strain over a series of panels,” in Mine Subsidence Technological Society, Third Triennial Conference on Buildings and Structures Subject to Ground Movement. Newcastle: Mine Subsidence Engineering Consultants Pty Ltd, pp. 189–198.

Walter, K. (2007) “Fire in the hole: Underground coal gasification may provide a secure energy supply and reduce greenhouse gas emissions,” Science & Technology Review, April, pp. 12–18. Available at: https://str.llnl.gov/content/pages/past-issues-pdfs/2007.04.pdf.

Whittaker, B. N. and Reddish, D. J. (1989) Subsidence: Occurrence, prediction and control. 1st ed. Elsevier Science.

Zangerl, C. J. (2003) Analysis of surface subsidence in crystalline rocks above the Gotthard highway tunnel, Switzerland. Swiss Federal Institute of Technology (ETH) Zürich.

Zulfahmi, Syafri, I., Abdurrokhim and Wattimena, R. K. (2017a) “Influence of mineral composition to rock strength on UCG process,” International Journal of Science and Research (IJSR), 6(6), pp. 1258–1262.

Zulfahmi, Syafri, I., Abdurrokhim and Wattimena, R. K. (2017b) “Thermal effects of geomechanics characteristics of soft rocks from M. Enim formation,” in The 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17). Ilsan (Seoul), Korea: IASEM, p. YP.05.SM1105_4395F6_2.

Downloads

Published

2020-11-24

Most read articles by the same author(s)