INQUIRING THE FLYROCK TO DETERMINE MINIMUM SAFE DISTANCE OF COAL OVERBURDEN BLASTING AGAINST RESIDENTIAL AREA

Authors

  • Raden Haris Handayana Indonesia Blasting Engineer Society
  • Fajar Shodik Department of Technical Services & QC Hanwha Mining
  • Sani Salahudin Department of Technical Services & QC Hanwha Mining

DOI:

https://doi.org/10.30556/imj.Vol26.No2.2023.1498

Keywords:

fly rock, safe radius, stemming

Abstract

Fly rock is a rock fragmentation that is thrown as a result of blasting. Such fragmentation that is thrown beyond the specified safe distance can cause a damage to the infrastructure, mechanical equipment and humans. This study aims to determine the safe radius of the fly rock that resulting from blasting residential area which that has a distance 200-300 m and has potentially distressing to cause damage. Calculating of the flying rock throwing distance is carried out theoretically and actually with orientation to the distance between spaces, the distance between burdens, minimum stemming height, minimum hole depth, powder factor, average charge blast hole and distance initial burdens. For theoretical calculations, the save distance is calculated by empirical methods and dimensional analysis. Results of the study shows that the maximum distance of the actual fly rock throw is 05.31 m and based on the predictions using the Cratering Method, the maximum distance of fly rocks is 172 m with a safety factor of 2 and the maximum distance of fly rocks is 199.04 m with a safety factor of 2. Based on the actual and predicted data above, it is not safe for blasting locations that is less than 200 m from residential areas, that refers to the safe radius threshold based on the regulation of the Minister of Energy and Mineral Resources No. 1827 K/30/MEM/2018.

References

Al-Zhahra, D., Wiyono, B. and Sudiyanto, A. (2022) ‘Prediksi jarak lemparan flyrock dengan metode analisis dimensi serta Richard dan Moore akibat kegiatan peledakan pada tambang bijih emas’, Indonesian Mining Professionals Journal, 4(2), pp. 145–152. Available at: https://doi.org/10.36986/impj.v4i2.74.

Amsya, R.M., Zakri, R.S. and Novrianto, N. (2021) ‘Analisis pengaruh geometri peledakan terhadap fly rock hasil peledakan di PT. Bintang Sumatra Pacific Kec. Pangkalan Kab. Lima Puluh Kota Provinsi Sumatera Barat’, Jurnal Sains dan Teknologi: Jurnal Keilmuan dan Aplikasi Teknologi Industri, 20(2), pp. 238–245. Available at: https://doi.org/10.36275/stsp.v20i2.306.

Balakrishnan, V. and Rai, P. (2021) ‘An overview of flyrock and its prediction in surface mine blasting using soft computing techniques’, Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 2(2), pp. 105–119. Available at: https://doi.org/10.53501/rteufemud.986903.

Eko, M.R., Haris, R.H., Lubis, J. and Deri, N.P. (2023) ‘Study of flyrock to reduce safe radius from 500 m to 300 m on blasting quarry at PT Vale Indonesia, Sorowako, Luwu Timur, South Sulawesi’, IOP Conference Series: Earth and Environmental Science, 1175(1), p. 012002. Available at: https://doi.org/10.1088/1755-1315/1175/1/012002.

Ghasemi, E., Sari, M. and Ataei, M. (2012) ‘Development of an empirical model for predicting the effects of controllable blasting parameters on flyrock distance in surface mines’, International Journal of Rock Mechanics and Mining Sciences, 52, pp. 163–170. Available at: https://doi.org/10.1016/j.ijrmms.2012.03.011.

Handayana, R.H., Mapanta, J., Barlian, E., Carlo, N., Hamdi and Lubis, J. (2022) ‘Configuration of blasting initiation system in mining to reduce the impact of ground vibration on the settlement environment’, Spanish Journal of Innovation and Integrity, 11, pp. 30–36.

Hidayat, S. (2021) ‘Environmental impacts of open pit mining blasting: Particular discussions on some specific issues’, Journal of Mining and Environmental Technology, 1(1), pp. 1–11.

Menteri Energi dan Sumber Daya Mineral (2018) Keputusan Menteri Energi dan Sumber Daya Mineral No.1827 K/30/MEM/2018 tentang Pedoman pelaksanaan kaidah teknir pertambangan yang baik. Indonesia.

Moore, A.J. and Richards, A.B. (2005) Kalgoorlie consolidated gold mines: Golden pike cut-back flyrock control and calibration of a predictive model. TERROCK Consulting Engineers.

Nababan, S.V.A., Santoso, E. and Kartini (2022) ‘Analisis prediksi jarak lemparan flyrock pada kegiatan peledakan di PT Darma Henwa’, Jurnal Himasapta, 7(2), pp. 79–82.

Nayak, N.P., Jain, A. and Ranjan Mahapatra, S. (2022) ‘Application of Mine Excellence software in flyrock prediction & mitigation’, Materials Today: Proceedings, 48, pp. 1271–1276. Available at: https://doi.org/10.1016/j.matpr.2021.08.282.

Ramadhan, R. and Yulhendra, D. (2020) ‘Kajian potensi flying rock peledakan terhadap radius aman alat peremuk crusher di CV Tekad Jaya Halaban Kabupaten Lima Puluh Kota Sumatera Barat’, Jurnal Bina Tambang, 5(3), pp. 1–6.

Santoso, E., Kartini, K. and Wanaldi, R. (2020) ‘Pembuatan aplikasi dengan menggunakan rumus empiris untuk memprediksi lemparan batu (flying rock) dari kegiatan peledakan’, Jurnal GEOSAPTA, 6(1), pp. 23–27. Available at: https://doi.org/10.20527/jg.v6i1.7825.

Suryadi and Kopa, R. (2019) ‘Analisis geometri peledakan untuk meminimalisir jarak lemparan batuan (flyrock) pada peledakan tambang terbuka PT Ansar Terang Crushindo II Pangkalan Sumatera Barat dengan visualisasi menggunakan Drone DJI Phantom 4’, Jurnal Bina Tambang, 4(3), pp. 175–186.

Zou, D. (2017) ‘Blasting safety for surface blasting’, in Theory and Technology of Rock Excavation for Civil Engineering. Singapore: Springer Singapore, pp. 343–377. Available at: https://doi.org/10.1007/978-981-10-1989-0_11.

Downloads

Published

2023-12-29